Uncategorized no image

Published on April 11th, 2021 | by Dapper Dan

0

How to Make Your Own Dog Mask – The Fundamentals

Share with your fellow Consumers!

In this article we’re going to look at how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques that you can use.

If you have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the home, you will need to get them some special dog protection.

Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it’s really very straightforward. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can’t just cut a rectangular shape from the cardboard, so you’ll need to cut around the edge of the mask so you get something which looks like a cone. The most important thing here is to be realistic with what type of paper plate that you’re using.

Then you’ll have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can make certain that nothing will leak once you put the mask on. Be sure that the edges are cut so that the edges are not sharp, as this can damage the edges of the mask.

Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the entire mask. You’ll want to start with one side of the mask , so that you can work your way round it before moving onto the other side. The paint needs to be slightly thicker than the cardboard, and it’s best that you leave about one-third of an inch of paint on the edges so that it runs over the cardboard.

Don’t fret too much about the paint getting stuck to your mask. It’s easy to eliminate it later, and it will leave you with a wonderful finished mask to show off to everybody! It’s also a good idea to wipe away any excess paint once you’re done, so that you don’t end up with smudges or smears on your dog.

Then it’s time to glue the mask onto your dog’s head. First you will need to be certain that you get a secure fit between the mask and your dog’s head. As soon as you’ve made sure that it’s secure, then you can begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the foundation of the mask and fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.

Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged firmly onto the face of your dog. Don’t make the folds too big or else it might look messy. Once you’ve done bike trailer for dogs this, you can then take out the mask and then attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain the ears are flat and make certain it’s not too short or long as this can cause some issues with the mask slipping off the dog’s face.

If you’re using a dog mask because your dog protection, you’ll need to do some sanding to be certain it is secure on your dog. You can accomplish this by sanding off any excess paper which might have been removed from your mask.

Dapper Dan
Share with your fellow Consumers!




Back to Top ↑